Saw Blades | Clamping Systems | SS Series Sliding Stops | Roller Tables
Manual Chain Feed | Adjustable Arm Stop

Saw Blades

Woodcutting
T2008-00 12” x 48t x 1” carbide
T2008-01 12” x 60t x 1” carbide
T2008-03 12” x 100t x 5/8 carbide
T2008-09 13” x 72t x 5/8 carbide (type 1-3 3512)
T2009-00 14” x 40t x 1” carbide
T2009-01 14” x 80t x 1” carbide
T2009-02 14” X 60t x 1” carbide
T2009-03 14” x 100t x 1” carbide
T2010-00 16” x 40t x 1” carbide
T2010-01 16” x 60t x 1” carbide
T2010-02 16” x 80t x 1” carbide
T2010-03 16” x 100t x 1” carbide
T2011-00 20” x 60t x 1” carbide
T2011-01 20” x 80t x 1” carbide
T2014-00 22” x 80t x 1” carbide

Metal Cutting Cutting
T1413-00 14” x 100t x 1” carbide –non ferrous
T1613-00 16” x 100t x 1” carbide –non ferrous
T1614-00 16” x 300t x 1” HSS —ferrous
T1618-00 18” x 300t x 1” HSS—ferrous
T2013-00 20” x 120t x 1” carbide non ferrous
T2014-02 22” x 120t x 1” carbide non ferrous

 

 

Clamping Systems

Original Saw’s Pneumatic clamping systems allow for a variety of clamping applications. The below listed items consist of cylinders clamping the material back against the fence or over center cylinders clamping the material against the table top, or a combination of both. The front firing cylinders are mounted on adjustable slide carriages with locking handle to adjust to any material width. The over center clamps are mounted behind the fence and when not clamped are fully behind the fence to allow for clear loading and unloading of the machine.

900500-00

 Pneumatic clamping system
2 cylinders clamp against fence
900500-01 Pneumatic clamping system
2 cylinders clamp against fence
2 cylinders clamp against table

Rear Pushing cylinder
(presses against fence)

Over Center Clamp
(presses down on table)
   
Original Saw Company has furthered its clamping systems with the 900500-02 over arm clamping system. This system is for clamping many smaller components at one time. The components of this system include 2 rear firing cylinders that line up the material with the fence and the over arm clamp that pulls down to clamp the material down on either side of the blade. The over arm clamp is adjustable up and down to allow different sized material to be clamped and cut.

Multi-Part over arm clamping system
900500-02 Pneumatic Clamping System over arm clamp and 2 rear pushing cylinders
     

 

SS Series Sliding Stops

900700 Sliding Stops
Our manual adjustable sliding stop system is designed to stand up to rigorous daily use and heavy material. The system consists of a heavy extruded aluminum rail with measuring tape, a powder coated formed steel slide assembly with locking knob, and an adjustable aluminum extrusion used to fine tune the system and allows it to measure down to 2”. These stops attach to our roller tables with included mounting hardware, and are available in 8’ and 16’ sections and it both right and left hand configurations.


Stop system mounted on
3512-01 radial arm saw


Front View

Rear View

 

 

Material Handling Roller Tables

040030-01

 Roller Table Extension with adjustable leg Wood Cutting 20” wide by 8’ long roller table with 8 rollers set on 12” centers. Ships complete with adjustable leg and mounting bracket for Heavy Duty and Super Duty Series wood cutting Radial Arm Saws

040030-09 Contractor Duty
Left hand mounting shown
15 rollers set on 6" centers
040030-02 Roller Table Extension with adjustable leg Wood Cutting 20” wide by 8’ long roller table with 15 rollers set on 6” centers. Ships complete with adjustable leg and mounting bracket for Heavy Duty and Super Duty Series wood cutting Radial Arm Saws

040030-03

 Roller Table Extension with adjustable leg Metal Cutting Left Hand side mounting 20” wide by 8’ long roller table with 8 rollers set on 12” centers. Ships complete with adjustable leg and mounting bracket for Super Duty Series Metal Cutting Radial Arm Saws

040030-04

 Roller Table Extension with adjustable leg Metal Cutting Right Hand side mounting 20” wide by 8’ long roller table with 8 rollers set on 12” centers. Ships complete with adjustable leg and mounting bracket for Super Duty Series Metal Cutting Radial Arm Saws
040030-05 Roller Table Extension with adjustable leg Metal Cutting Left Hand side mounting 20” wide by 8’ long roller table with 15 rollers set on 6” centers. Ships complete with adjustable leg and mounting bracket for Super Duty Series Metal Cutting Radial Arm Saws
040030-06 Roller Table Extension with adjustable leg Metal Cutting Right Hand side mounting 20” wide by 8’ long roller table with 15 rollers set on 6” centers. Ships complete with adjustable leg and mounting bracket for Super Duty Series Metal Cutting Radial Arm Saws
040030-07 Roller Table Extension with adjustable leg Wood Cutting Contractor Duty Series Left hand side mounting 20” wide by 8’ long roller table with 8 rollers set on 12” centers. Ships complete with adjustable leg and mounting bracket for Contractor Duty Series
040030-08 Roller Table Extension with adjustable leg Wood Cutting Contractor Duty Series Right hand side mounting 20” wide by 8’ long roller table with 8 rollers set on 12” centers. Ships complete with adjustable leg and mounting bracket for Contractor Duty Series
040030-09 Roller Table Extension with adjustable leg Wood Cutting Contractor Duty Series Left hand side mounting 20” wide by 8’ long roller table with 15 rollers set on 6” centers. Ships complete with adjustable leg and mounting bracket for Contractor Duty Series
040030-10 Roller Table Extension with adjustable leg Wood Cutting Contractor Duty Series Right hand side mounting 20” wide by 8’ long roller table with 15 rollers set on 6” centers. Ships complete with adjustable leg and mounting bracket for Contractor Duty Series
040030 Roller Table Extension table and rollers only no legs 20” wide by 8’ long roller table with 8 rollers set on 12” centers
T1735 Adjustable leg kit ( one included with above kits (040030-01 – 040030-10) Includes: leg stand, adjustable foot kit, mounting hardware

 

 

Manual Chain Feed
(standard on metal cutter)
Provides full control for heavy production work, for heavy sawing, dadoing, and rafter notching. For Super Duty models only.
40021 -- Chain Feed -- 44" Arm Models #3551, 3571, 3553
40022 -- Chain Feed -- 52" Arm Models #3556, 3576, 3558

 

 

35003 -- Adjustable Arm Stop
Adjustable Crosscut Stop
 

 

HOME | WOOD CUTTING | METAL CUTTING | HORIZONTAL PANEL SAW | REPLACEMENT
ACCESSORIES | CROSS FEED | TRADESHOW SCHEDULE

THE ORIGINAL SAW COMPANY
465 3rd Ave SE      Britt, Iowa 50423
800-733-4063     641-843-3868     Fax: 641-843-3869
customerservice@originalsaw.com

Web Site Development & Design By

 
Wood Cutting Saw Metal Cutting Saw Horizontal Panel Saw Replacement Accessories Cross Feed Home Tradeshow Schedule