Developed
for production applications which require accurate high
speed cutting of ferrous and non ferrous material such
as steel, aluminum, copper and other material such as
plastic, fiber glass, resins, ect. Smoothly cut surfaces
are achieved at any combination of miter and bevel angles,
Use of the optional mist coolant system, is recommended
for maximum blade life (cutting non-ferrous material only)
while maintaining smoothest, highest quality finish.
MODEL
3579-16M
3579-16L
3579-20M
3579-20L
3579-22M
3579-22L
Arm
Medium
Long
Medium
Long
Medium
Long
Blade
Size
16"/400mm
16"/400mm
20"/500mm
20"/500mm
22"/550mm
22"/550mm
MOTOR: ALL MOTORS TOTALLY ENCLOSED FAN COOLED
HP
7.5*
7.5*
7.5*
7.5*
7.5*
7.5*
Phase
3
3
3
3
3
3
Hertz
50/60
50/60
50/60
50/60
50/60
50/60
Volts*
230/460**
230/460**
230/460**
230/460**
230/460**
230/460**
Brake
Auto
Auto
Auto
Auto
Auto
Auto
Arbor
1"
x 1-3/8"
1"
x 1-3/8"
1"
x 1-3/8"
1"
x 1-3/8"
1"
x 1-3/8"
1"
x 1-3/8"
CAPACITIES
Maximum
Cross
Cut
1" Stock
24"/609mm
32"/812mm
Maximum
Miter
45°
1" Stock
16"/406mm
21
5/8"/549mm
Maximum
Depth
of Cut
5"/127mm
5"/127mm
7"/175mm
7"/175mm
8"/200mm
8"/200mm
Maximum
Depth
of
Cut
45° bevel
2"/50mm
2"/50mm
3 3/8"/85mm
3 3/8"/85mm
4"/101mm
4"/101mm
Standard
Equipment
7.5
hp 3-phase totally enclosed fan cooled motor available
in the following voltages: 208/230/380/415/460/575
Automatic
brake system
Metal
cutting "door style" guard allows for easy blade
removal and installation
Manual
(hand crank) chain carriage feed - allows for better control
for carriage.
24"
crosscut on 'M' (Medium Arm) Models
32"
crosscut on 'L' (Long Arm) Models
Adjustable
cross cut stop
Base column lock
Precision
carriage riding on 8 wide contact double row ball bearings,
providing a very smooth vibration free travel.
Powder
coated heavy gage steel frame an legs
Metal
cutter table, with T-Slot rails, this can ne used at cutting
surface or allows for easy mounting or your own table
top.
Arbor
nut and precision ground blade collars
Wrench
kit (includes allen arbor wrench, flat arbor wrench, &
misc allen wrenches)
Carriage Control
The metal cutting series comes standard with a manual chain feed assembly. This feature gives the operator better control of the carriage versus pulling the carriage by hand.
Guarding
Shown left is the Metal Cutter’s exclusive “door style” guard that allows easier and quicker blade changes, the guard needs only to be opened not taken off to change the blade out. This is a very important feature for the ferrous cutting application where frequent blade changes are necessary for optimum cutting performance and safety.
Table
The Metal Cutting Series comes with the standard t-slot aluminum extruded top. This top allows for easy attaching of our aluminum fence (shown), clamping systems, or table surface options, as well as your own clamping jigs or cutting fixtures. These all come mounted to a extruded leveling frame for easy leveling of the entire table assembly through out the life of the machine.
